The ÖBB 4023 is now ready Contact key To activate the cab, the contact key must be inserted and switched on the»fst AKTIV«position (watch»picture 2«). Insert the contact key and turn it to the active position. Move the reverser lever to the neutral position. The ÖBB 4023 is now ready Changing cab procedure When you want to switch the cab, you must take the contact key with you to the cab on the other site. The Headlights will turn on automatically when you select the direction. Insert contact key and turn it to the active position. Select type of lights on the battery panel. When you turn on the battery you can go in the cab from which you want to drive. Switch on the battery - Battery panel is only in one cab! Change the cab if the battery panel is not in current cab. After 10 seconds the battery will turn off (A, B and D indicator will turn off).ħ 2.5. To activate the forced option turn and hold the battery switch to the left twice for 2 seconds. The second option is to force the battery to turn off in 10 seconds. To use the first option (normal turn off) turn the battery switch to the left (momentary) and wait about one minute to turn off the A and B circuit, the circuit D will be turned off after about 40 hours. For turning off the battery there are two options. When all indicators will turn on (A, B and D), then the battery is also turned on. To turn on the battery on the train, turn the battery switch to the right (momentary).
![train simulator 2013 cruise control train simulator 2013 cruise control](https://www.gamingnexus.com/Images/Article/dfqvmb3706/1.jpg)
Battery panel PZB on/off (1) SIFA on/off (2) Battery switch (3) Light switch (4) Important: The battery panel is only in the ÖBB 4023_C cab.